MINI RACER PERFORMANCE PARTS AND SUPPLIES
All of our grips are mades especially for the 1/2" PW50 and XR/CRF 50 stock handlebars, Moose & Mika.
Constructed from the highest quality aerospace aluminum for maximum strength, the PW50 series handlebar is a unique design that fits only the famed Yamaha PW50. Complete with bar clamps and brake perch, it will mount perfectly to any PW50, giving some style to one of the most recognizable bikes that has ever been around. The bars are designed to fit small hands with a thickness that is less than 7/8, and will reduce arm fatigue compare to the stock steel bars.
Billet top plate with bar risers
Moose Racing throttle cable 2003-present $28.99
Cable - Front Brake
$12.99
Throttle Set Screw
speed limiter
One tube will do one set of grips
Billet top plate requires the use of our bar risers shown below
Bar risers shown on stock top plate and our billet top plate. Note Bar risers and top plate sold separately
See Our Billet Oil Injection
Plug on the Performance Page
Motion Pro Throttle Cable without oil injection 1982-2002 29.99
Motion Pro throttle cable 1981-2002 $14.99
See Our Billet Oil Injection
Plug on the Performance Page
Motion Pro throttle cable without oil injection 2003-present 29.99
Magnum full waffle grips
$8.99 retail - Sale $4.99
Aluminum bars. Replace the OEM non-adjustable steel handlebar with a 4 post clamp system that allows you to adjust handlebar position and includes a brake mount so you can swap your OEM lever to handlebars.
The bars are designed to fit smaller child's hands with smaller 3/4" diameter bar than normal adult size 7/8" handlebar to reduce the arm fatigue compared to stock handlebars.
Must use smaller diameter grips or OEM grips with handlebars.
Meassurements: Width 560MM / Height 73MM / base 145MM / Sweep 72MM.
ODI PODIUM
PEE-WEE 19mm (3/4") Race Handlebar
(OEM PW50 size)
Constructed of 7075 heat treated Alloy
Solid ODI Crossbar for improved strength
Knurled left slide improves grip to bar adhesion
Laser Etched ODI Graphics
620w 84h 65r 145c 65s 160 controls
6061 Billet Aluminum Bar Mounts
Billet Rear Brake Perch w/rotational clamp
(designed for use with OEM lever)
SX8 EVA High-Density Handlebar Pad
Specifically designed for riders looking for a taller bar more aggressive bar with less sweep for racing
Cable-Throttle 1982 - 2002
$12.99
Handlebar replacement parts
ODI replacement brake perch $39.99
Motion Pro throttle cable 2003 to present $14.99
Clearance while supplies last
Aluminum handlebars. These are made in PRC
and include handlebar mounts and brake lever
bracket
Quickturn throttle tube $59.99
Aftermarket Minis Billet Quick Turn Throttle Tube to help your rider not have such a long twist of the throttle so they don't have to try to regrip the handlebar to give it full throttle. Our billet throttle tube is cnc'd from aluminum and is much stronger than the OEM Yamaha plastic throttle tube. We gave it the quickest turn possible while still leaving a groove for the cable to ride in keeping it safe. We also gave the gripping surface a knurled finish keeping your grip from spinning on the throttle tube.
Aftermarket Minis Handlebar Kit is a complete bolt on kit that comes complete with aluminum handlebar, cnc'd rear brake perch with all 4mm head size stainless steel hardware, cnc'd billet handlebar mount with 8mm head size stainless steel hardware. We didn't cut any corners when making or designing this kit. Stock throttle and cables work with both handlebar kit options.
2" Taller bars so no risers necessary. Bolt on and ride!